Download Print this page

Storing/ Deleting A Hot Key Number; Dialing Call Numbers; Dialing With The Repertory Keys; Last Number Redial - Siemens euroset User Manual

Hide thumbs

Advertisement

Table of Contents
19.04.2000
2015-EU1-eng.fm
euroset 2015, A31008-E2015-B100-2-Y719

Storing/ deleting a hot key number

"
l
d
If the telephone is locked (see „Locking/unlocking the telephone" auf
Seite 8), the hot key number is automatically dialed when any key is
>"l
pressed (except
,
,
J
Lift the handset, then start the function.
Enter the PIN (factory setting: 0000).
The hot key number is displayed.
J
If no hot key number has been stored, the display will
show .
Enter a hot key number (max. 32 digits)
/
or
"<
Delete the hot key number
Press the set key, then replace the handset

Dialing call numbers

>
Dialing call numbers
J
Lift the handset (or press the loudspk. key
Dial the call number.
Any digits following the 20th digit are shifted from right to left on the display.
Dial pauses of 3 seconds can be inserted by pressing
not occur as the first element in a call number).
>

Dialing with the repertory keys

Lift the handset (or press the loudspk. key
If necessary, press
K
key).
Harris
Press the repertory key.
Last number redial (one of the last 5 call numbers)
The last 5 different call numbers dialed are automatically saved (max. 32
>
digits each).
/
/
Lift the handset (or press the loudspk. key
Press the redial key repeatedly until the required call
...
J
number appears with the place number (1...5 on the
left).
Enter the place number (1...5).
The relevant call number is redialed.
Dialing a hot key number
Prerequisite: A hot key number has been stored and the telephone is
>
locked (the display shows
"
Lift the handset, then press any key
(except

,
,
).
d
/
(a pause should
d
a
(for a 2nd level repertory
d
)

l
d
,
,
,
,
).
– 5 –
English
).
).
).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Euroset 2015