Table of Contents
Advertisement
INSTALLATION
1) If installing optional mesh glass guard - See optional "Mesh Glass
Guard" installation instructions.
2) Install brackets onto the back of the faceplate - 3 screws for each
bracket in locations shown below.
3) To install the 4 pc. faceplate - hook brackets (located on back of
faceplate) over the two middle tabs on the glass door frame.
If thicker fi nishing materials are used - the faceplate may be
adjusted out - up to 1/2".
56
4 PIECE FACEPLATE INSTALLATION
+1/2"
+1/4"
Use fi rst notch in bracket
for standard installation
Important: 1/2" gap required between faceplate and
fi nished wall when using part #256-924, 256-926, 256-
927 (4 pc. faceplate).
Final Install
Regency Horizon™ HZ40E-2 Gas Fireplace
Hook bracket over
these tabs
Advertisement
Table of Contents
