Enabling Wifi - Westpac EFTPOS 1 User Manual

Step Terminal Display
3
Ethernet
Enabled
1. Edit
2. Disable
4
Ethernet
Disable?
No Yes
5
Tuesday 24 June 2014
Menu
60
Action
Select the "Disable" option on the touch screen
or enter the number of the menu item using the
keypad
The terminal will prompt to re-confirm disabling
Ethernet.
Select "Yes" on the touch screen or press the
key to continue.
To cancel select "No" or the key.
Once confirmed, the terminal will return to the idle
screen.
The Ethernet signal icon should now be
removed from the idle screen.
EFTPOS 1 USER GUIDE
8�2

Enabling WiFi

Your terminal has the ability to process transactions over the Internet via a WiFi connection. If
you wish to use a WiFi connection for transaction processing, follow the steps below.
Step Terminal Display Action
1 On the main menu navigate to and select the
Utility
"Utility" option on the touch screen or enter the
number of the menu item using the keypad.
1. Reset Terminal
In the Utility menu select the "Network" option on
the touch screen or enter the number of the menu
2. Delete S&F
item using the keypad.
3. Network
4. Bluetooth Config
2 Select the "1. WIFI" option on the touch screen
Network
or enter the number of the menu item using the
Select Type
keypad.
1. WIFI
2. GPRS
3. Ethernet
3 Select the "3. Enable" option on the touch screen
WiFi
or enter the number of the menu item using the
Disabled
keypad.
1. Scan New
2. Add WiFi
3. Enable
EFTPOS 1 USER GUIDE 61