Malaguti Madison3 250ie Workshop Manual page 40

MADISON 3
250 ie
• Remove foam (A) from 12V power socket and detach
connectors (B).
When reassembling note that foam (A) must
be refitted to protect connectors and soc-
ket.
• Open hatch (C).
• Remove fuel tank cap (D), remove gasket (E), discon-
necting it from the drip hose, then refit the cap.
Screw the fuel tank cap back on immedia-
tely after removing the gasket.
• Undo screws (V3d) and disengage coil (F) from foot-
board.
If no further parts are to be removed, it is
not necessary to detach the coil wires.
FRAME AND RUNNING GEAR
DISASSEMBLY
06039152_1
B
A
06039260_1
06039262_1
41 05/06
D
C
V
3d
F
A
4
A