HP EliteOne 705 G1 Maintenance & Service Manual page 56

4. To remove a memory module, press outward on the two latches on each side of the SODIMM (1), then
pull the SODIMM out of the socket (2).
5. To install a memory module, slide the SODIMM into the socket at approximately a 30° angle (1), then
press the SODIMM down (2) so that the latches lock it in place.
NOTE:
on the memory socket.
The computer automatically recognizes the additional memory when you turn on the computer.
46 Chapter 5 Removal and Replacement Procedures
A memory module can be installed in only one way. Match the notch on the module with the tab
ENWW