Related Manuals for PPA Eurus Custom
Summary of Contents for PPA Eurus Custom
- Page 1 COMFORT whit SECURITY COMFORT whit SECURITY www.ppa.com.br PPA - Portas e Portões Automáticos Ltda. Av. Labieno da Costa Machado n-7 3526 - Distrito Industrial CEP: 17.400-000 - Tel: (0**) 14 3407-1000 Garça/SP - Brasil...
-
Page 2: Table Of Contents
Gate operator with micro-processed digital control for gates up to 300 Kg Here are some of the necessary tools for the assembly and installation of the equipment: Installation Manual TOOLS: EURUS CUSTOM Contents Cannon handle socket wrench * Installation Procedure ................2 * Tools .................... -
Page 3: Preparation Of The Gate Before Automation
COMFORT whit SECURITY COMFORT whit SECURITY INSTALLING THE RACK PREPARATION OF THE GATE BEFORE AUTOMATION Before installation of the machine, check rolling, following the instructions below: 1º Step: Set the machine on manual mode (see page 6), open gate completely, and place rack on gear in a way 1º... -
Page 4: Releasing System
The micro-processed digital control unit controls single-phase induction Step 1: Keep the jumper HRF closed (jumpers position is shown on motors 127Vca/220Vca – 50Hz/60Hz for PPA gate operators. Electrical Connections Squeme, see page 17). Bring transmitter close to receptor, press and keep pressing button (left or right). -
Page 5: Turning On Electronic Lock
COMFORT whit SECURITY COMFORT whit SECURITY RECORDING ELECTRONIC LOCK TRANSMITTER TURNING OFF ELECTRONIC LOCK It locks and unlocks all access buttons memorized in control unit and external command. Only the last 4 electronic lock transmitters will be memorized. Step 1: Keep jumper HRF closed. Steps to memorize the transmitters: Step 2: Press and release the left button of the electronic lock. -
Page 6: Blow Out Image
COMFORT whit SECURITY COMFORT whit SECURITY BLOW OUT IMAGE - EURUS CUSTOM Page 08 Page 09... -
Page 7: Types Of Virtual Fuse Protection
SCREW PP PL M5 X 25MM C10190 During opening/closing gate operation, if there is power surge, the control EURUS CUSTOM BODY FRAME WITH LABEL A11679 unit will immediately turn motor off and next, the led (SN) will start blinking rapidly, SMOOTH WASHER 3/8"... -
Page 8: Adjusting Trimpots
COMFORT whit SECURITY COMFORT whit SECURITY ADJUSTING THE TRIMPOTS TRIMPOT PAUSE TRIMPOT FORCE Function: To adjust control unit pause timing when it is in automatic Function: To adjust motor power applied on gate (Electronic clutch). mode. Opening and Closing: Same adjustment. Position ‘... -
Page 9: Auto Light Timer (Lg)
COMFORT whit SECURITY COMFORT whit SECURITY SMOOTH START AUTO LIGHT TIMER (LG) It has the purpose of eliminating mechanical jercks on the clutch, sprocket, Garage light module. Light is turned on every time gate is in motion. Every rack bar, and on the endless axle (eixo sem fim) during the start, increasing with that, time motor is turned off, the garage light is timed for 2 minutes. -
Page 10: Electrical Connections Scheme
PPA’s responsibilities are restricted to repair or substitute the product manufactured by PPA. Because of the credibility and trust put on PPA products, we add to the period mentioned above more 275 days reaching, therefore, a total of 1 (one) year, also from the time of acquisition to be shown by consumer through proof of purchase.
Need help?
Do you have a question about the Eurus Custom and is the answer not in the manual?
Questions and answers