Installing On A Wall - Samsung OfficeServ 7030 Installation Manual

CHAPTER 3. Installing the System

3.1.2 Installing on a Wall

To install the OfficeServ 7030 cabinet with a wall mount template, proceed as follows:
1) Drill holes on the marked position of the Wall Mount Template. Drill holes with a
minimum of 33 mm depth and approx. 6 mm width to ease the insertion of the plastic
bushings.
2) Fix plastic anchors into the drilled holes with a hammer.
3) Align the screw holes of the wall-type bracket to the fixed plastic anchors' positions.
Insert the screws to each hole and tighten the screws with a Philips screw driver.
2
Figure 3.2 Installation on a Wall (1)
Figure 3.3 Installation on a Wall (2)
Figure 3.4 Installation on a Wall (3)
© SAMSUNG Electronics Co., Ltd.