Connecting Digital Phones - Samsung OfficeServ 7030 Installation Manual

Connecting to the 4SM Board
Connect an analog phone to the port of the 4SM board with a pair of AWG #24 or AWG
#26 cables.
Pin No.
Function

6.1.3 Connecting Digital Phones

Connect a digital phone to the base board's 4DM.
Connecting to the 4DM Board
Connect a digital phone to the ports of the base board's 4DM with a pair of AWG #24 or
AWG #26 cables.
Pin No.
Function
© SAMSUNG Electronics Co., Ltd.
1 2 3
- - -
Figure 6.3 P1~P4(RJ-45) Port of the 4SM Board
1 2 3
-
Figure 6.4 P1~P4(RJ-45) Port of the 4DM Board
Maximum number of allowed DS-5012L phones
Up to one DS-5012L phone can be connected to each 4DM board of the
OfficeServ 7030 system. If more than one DS-5012L phone are connected to the
OfficeServ 7030 Installation Manual
P1~ P4 Port
(RJ-45)
4 5 6
SLI SLI -
RING
TIP
P1~ P4 Port
(RJ-45)
4 5 6
DLI DLI -
TIP RING
7 8
7 8
- -
3