V. Comfort Adjustments - Pride Mobility Jazzy 1110 Owner's Manual

To mount the footrest:
1. Match the two tabs at the back of the footrest mounting
bracket with the two semicircular notches in the vertical bar
of the front frame.
2. Push the tabs through the matching notches.
3. Slide the footrest down into place. See figure 25.
To connect the controller:
1. Attach controller to the seat arm. See V. “Comfort
Adjustments.”
2. Plug the controller harness connector into the electronics tray
on the rear battery tray weldment as shown in figure 26.
CAUTION ! Do not place the controller cable so
that it can be pinched in the seat frame or the
power base frame.
UK Jazzy 1113/RevF/Apr03
V I . A S S E M B L Y
Figure 23. Seat Installation
Figure 24. Locking the Seat Frame
Figure 25. Mounting the Footrest
Figure 26. Connecting the Controller
Harness
www.pridemobility.com
CONTROLLER
HARNESS
CONNECTOR
27