Comfort Adjustments - Pride Mobility JET 3 Owner's Manual

V . C O M F O R T
After you have used your Jet 3 for an extended period of time, you may find the need to make some adjustments
increase your comfort.
CAUTION! If your Jet was configured at your authorized Pride provider, please consult your
healthcare professional before changing the seat position or making any other adjustment. Some
adjustments may degrade your Jet’s performance and safety by changing its center of gravity.
SEAT HEIGHT
You can change the seat height to one of five positions in one-inch increments.
To change the seat height:
1. Remove the seat. See VI. “Disassembly.”
2. Remove the shroud.
3. Use a 14 mm wrench to loosen and remove the hex-head nut and bolt. See figure 8.
4. Loosen the seat post base locking nut using a 11 mm wrench and a 5 mm hex key.
5. Slide the seat pedestal up or down in the seat post base.
6. Align the holes on the seat post and the seat post base.
7. Reinstall and tighten the hex-head nut and bolt.
8. Retighten the seat post base locking nut.
HEX-HEAD
NUT
SEAT
SEAT POST
POST
BASE
BASE
LOCKING
NUT
Figure 8. Seat Height
Adjustment
ARMREST WIDTH AND HEIGHT
To change the armrest width:
1. Locate the setscrew on the armrest receiver bracket. See figure 9.
2. Loosen the setscrew, and slide the armrest in or out to the desired width.
3. Retighten the setscrew.
4. Repeat for the other armrest.
Jet 3/Rev I/Feb03
All manuals and user guides at all-guides.com
SEAT POST
www.pridemobility.com
A D J U S T M E N T S
LOOSEN TO ADJUST ARMREST HEIGHT.
Figure 9. Armrest Width and
Height Adjustment
LOOSEN TO ADJUST
ARMREST WIDTH.
21