Pride Mobility Jazzy 1110 Owner's Manual page 18

The Jazzy 1113 disassembles into eight easily transportable component assemblies—with no tools required. See
figure 4.
WARNING ! Even though no tools are required to disassemble or assemble the Jazzy 1113, you
should take care not to place your hands or fingers on the areas of the component assemblies
where they may be pinched, as the assemblies “snap” together or “snap” apart.
WARNING! Some power chair components are heavy. You may need assistance to lift or carry
them. Please refer to III. “Your Power Chair” for specific components weights.
SEAT
RIGHT FRAME
ASSEMBLY
NOTE: During both the disassembly and the assembly of the Jazzy 1113, you may find it helpful to engage
the Jazzy drive motors so that it does not roll while you are disassembling or assembling it. See III. “Your
Power Chair.”
To disassemble the Jazzy 1113:
Position the Jazzy in a location where there is ample working room on all four sides of the Jazzy. We recommend
1 meter or more of clearance on all sides. There are eight component assemblies, some of which take up a great
deal of space when disassembled from the chair. Also, make certain that the Jazzy is turned off.
18
I V . D I S A S S E M B L Y
FOOTREST
Figure 4. The Jazzy 1113 Component Assemblies
www.pridemobility.com
BATTERY WELL FRAME
FRONT FRAME
BATTERY
BOXES (2)
LEFT FRAME
ASSEMBLY
UK Jazzy 1113/RevF/Apr03