Connecting Bluetooth Devices; Taskbar Connection Indicator; Led Connection Indicator - Honeywell HX2 User Manual

Connecting Bluetooth Devices

Before connecting to Bluetooth Devices:
The system administrator has discovered, paired, connected and disconnected (using LXEZ Pairing Control Panel)
l
Bluetooth devices for each HX2.
The system administrator has enabled and disabled LXEZ Pairing parameters for the HX2.
l
The system administrator has also assigned a Computer Friendly Name using LXEZ Pairing Control Panel for the HX2.
l
To connect Bluetooth devices, the HX2 should be as close as possible and in direct line of sight (distances up to 32.8 feet or 10
meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the HX2.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.

Taskbar Connection Indicator

HX2 is connected to one or more of the targeted Bluetooth device(s).
HX2 is not connected to any Bluetooth device.
HX2 is ready to connect with any Bluetooth device.
HX2 is out of range of all paired Bluetooth device(s). Connection is inactive.

LED Connection Indicator

When the Bluetooth LED on the HX2 is off, Bluetooth hardware has been turned off or it does not exist in the HX2.
When the Bluetooth LED on the HX2 is on:
the HX2 is paired with another Bluetooth device but is out of range or not connected, or
l
is paired and connected to another Bluetooth device, or
l
is discovering other Bluetooth devices.
l
The Bluetooth LED
Blinks slowly (Bluetooth LED is on for one second, off for five seconds) when it is idle.
l
Blinks quickly (Bluetooth LED is on for 1/4 second, off for 2 seconds when the HX2 is discovering other Bluetooth
l
devices.
And blinks normally (Bluetooth LED is on for 1/2 second, off for 1/2 second) when it is connected.
l
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the HX2.
2-21