Assemble The Hipflip - Honeywell HX2 User Manual

Assemble the HipFlip

The hip flip may be pre-assembled by Honeywell.
1. Unpack the Hip Flip.
2. Slide the belt through the loops on the Hip Flip. Do not put the hip flip on yet.
3. Slide the battery into the battery sleeve on the hip flip.
4. Snap all tethered devices to the connectors at the back of the HX2.
5. Snap the HX2 into the hip flip mounting brackets.
6. Attach the battery cable to the battery.
7. Put the hip flip on.
8. Slip the ring scanner (if included) over one of your fingers, making sure your thumb or trigger finger can easily reach the
scan button.
9. Adjust the HX2 hip assembly for comfort. Occasionally check all connectors for stability.
2-10
1. HX2 Mounting Bracket
2. HX2 Mounting Bracket
3. Battery Sleeve
4. Battery