Cornelius Granita Training Manual page 45

C F
ONDENSER AN
1. Remove 2 screws from the upper plastic mold-
ing and lift the side panel out of the lower plastic
molding.
2. Remove the 4 screws from the front access
panel.
3. Remove the 4 - 10mm compressor hold down
nuts and move the compressor away from the
condenser fan motor assembly.
4. Remove the 2 13 mm bolts that hold the condenser fan motor bracket in place and pull the assembly
out of the chassis.
© 2003, IMI Cornelius Inc.
M R
OTOR EPLACEMENT
Condenser Fan
Motor Bolts
FIGURE 72
- 37 -
Ice Peak Training Manual
Mounting
Screws
Lower
Plastic
Molding
FIGURE 70
FIGURE 71
Moving the
Compressor
for Fan Motor
Clearance
FIGURE 73
Publication Number: TP01057