Rear Merchandiser Lights
1.
Remove the rear merchandiser by sliding it upwards to
access the light bulb from the rear back-lit merchandiser.
2.
Then remove the light bulb(s).
3.
Insert the new light bulb(s) (BA).
4.
Reassemble the rear back-lit merchandiser making sure
that its slots are inserted properly in the relevant brackets.
5.
Plug machine into the power supply.
© 2003, IMI Cornelius Inc.
- 21 -
Ice Peak Training Manual
Rear
Back-lit
Merchandiser
FIGURE 36
;Bracket
Light
Bulb
FIGURE 37
Publication Number: TP01057