Cornelius Granita Training Manual page 42

Ice Peak Training Manual
4. Remove the 3 screws from the rear merchandiser light bracket and disconnect the wire harness
plugs.
5. Remove the 2 mounting screws from the gear motor cooling fan. Disconnect the ground wire and
power connection.
Mounting
Screws
6. Remove the viscosity adjustment assembly.
Mounting
Tension
Spring
Publication Number: TP01057
FIGURE 57
FIGURE 59
FIGURE 61
Power
Connector
Ground
Wire
- 34 -
FIGURE 58
FIGURE 60
FIGURE 62
© 2003, IMI Cornelius Inc.