Atlona AT-UHD-SW-52 User Manual page 15

Command
AudioOutX Y
ARC X
VOUT1 +
VOUT1 -
VOUT1 YY
Ex. VOUT1 -60
VOUT1 sta
VOUTMute1 X
Note: Volume output is mirrored per HDMI port. Adjusting output 1 will also adjust output 2.
IP Commands
Command
IPCFG
IPQuit
IPAddUser X Y
Ex. IPAddUser Atlona 1234
IPAddUser
IPDelUser X
IPDHCP X
IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPPort X
IPLogin X
Ex. IPLogin off
Broadcast X
Ex. Broadcast on
InputBroadcast X
Ex. InputBroadcast on
InputStatus
Ex. InputStatus
InputStatusX
Ex. InputStatusX
IPTimeout XX
Ex. IPTimeout 300
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback is "Command FAILED"
atlona.com
Feedback Description
AudioOutX on Turns the HDMI audio of each output (X= 1, 2) on/off (Y= on, off, sta)
Ex. Turn Output 2 HDMI audio off = AudioOut2 off
ARC on Turns on/off ARC (X= on, off, sta)
VOUT1 XX Increases volume output by 1
VOUT1 XX Decreases volume output by 1
VOUT1 XX Set volume output to a specific value (XX= -80 to 6)
Ex. VOUT1 -60
VOUT1 YY Displays current volume output
VOUTMute1 X Mute or unmute the output volume (X= on, off, sta)
Feedback
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port : x
IPQuit
TCP/IP user was added
username password
username password
username password
TCP/IP user was deleted
IPDHCP X
IPStatic X Y Z
Ex. IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPPort X
IPLogin X
Ex. IPLogin off
Broadcast X
Ex. Broadcast on
InputBroadcast X
Ex. InputBroadcast on
InputStatus
Ex. InputStatus 11001
InputStatusX Y
Ex. InputStatus2 1
IPTimeout XX
Ex. IPTimeout300
Description
Displays IP address configuration
Logs out of TCP/IP Connection
Adds a user for TCP/IP control
X= user and Y= Password
Displays a list of users and passwords
Delete a user from TCP/IP X= username
Turns DHCP on or off X= on, off, sta
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
Set the TCP/IP Port
Enables IP Login
X= on, off, sta
Sets broadcast mode on or off
X= on, off, sta
Sets the input broadcast reporting status
X= on, off, sta
Displays the input status for each input
1 = active input, 0 = no source connection
Displays the input status for the specified input. X= input
number, and Y is returned for the source status: Y=0 is no
source connection, Y=1 is active input
Determines amount of seconds of inactivity before TCP/IP
disconnects
15
Toll free: 1-877-536-3976
Local: 1-408-962-0515