Control Panel - Konica Minolta bizhub C451 Copy Operations

Before making copies

Control panel

No. Part name
1 Touch panel
2 Main Power indicator
3 [Power] (auxiliary power) key
4 [Mode Memory] key
5 [Utility/Counter] key
6 [Reset] key
7 [Interrupt] key
8 [Stop] key
9 [Proof Copy] key
10 [Start] key
11 Data indicator
bizhub C451/C550/C650
22
21
20
19
18
17
16
15
1
14 13 12 11 10
Description
Displays various screens and messages.
Specify the various settings by directly touching the panel.
Lights up in green when the machine is turned on with the main
power switch.
Press to turn on/off machine operations. When turned off, the
machine enters a state where it conserves energy.
Press to register (store) the desired copy/fax/scan settings as a
program or to recall a registered program. (See p. 5-9.)
Press to display the Meter Count screen and the Utility screen.
Press to clear all settings (except programmed settings) entered
in the control panel and touch panel.
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and
the message "Now in Interrupt mode." appears on the touch
panel. To cancel Interrupt mode, press the [Interrupt] key again.
Pressing the [Stop] key while copying, scanning or printing tem-
porarily stops the operation.
Press to print a single proof copy to be checked before printing
a large number of copies. (See p. 5-6.)
Press to start the copy, scan or fax operation. When this machine
is ready to begin the operation, the indicator on the [Start] key
lights up in blue. If the indicator on the [Start] key lights up in or-
ange, copying cannot begin.
Press to restart a stopped job. For details on jobs, refer to "Over-
view of job list screen" on page 12-3.
Flashes in blue while a print job is being received.
Lights up in blue when a print job is queued to be printed or while
it is being printed.
The indicator lights up in blue when there is saved fax data or un-
printed fax data.
2
3
4
5
6
7
8
9
3
3-25