Printing A Stored Job - Konica Minolta bizhub C451 Copy Operations

Managing jobs
Printing a proof copy of a stored job
A single copy of a stored job can be printed in order to be checked.
The Held Jobs list contains jobs such as those for which a proof copy was being printed when the automatic
system reset operation was performed.
Note
For details on displaying the screen, refer to "Displaying the current jobs list (stored jobs and active
jobs)" on page 12-11.
1
In the Current Jobs list of the Print tab, touch [Release Held Job].
The Release Held Job screen appears.
2
From the job list, select the job whose proof copy is to be printed, and then touch [Proof Copy] key.
– If the job to be removed from the Held Jobs list is not displayed, touch
job is displayed.
– If an incorrect job was selected, touch the button for the selected job again to deselect it.
– After the single proof copy is printed, check the print result.
How is printing of a proof copy stopped?
?
% Press the [Stop] key.
!
Detail
To change the settings, touch [Check Job Set.] in the Release Held Job screen. For details, refer to
"Printing a stored job" on page 12-14.
bizhub C451/C550/C650
12
or until the desired
12-13