Konica Minolta bizhub C451 Copy Operations page 475

Replacing toner cartridges and staples and emptying punch scrap box
Screen while a job is being performed
bizhub C451
bizhub C550/650
!
Detail
When performed by user
If the punch scrap box has become full while a job is being performed, the job being performed is
paused. To continue the job without canceling the Punch setting, empty the punch scrap box. To cancel
the Punch setting and continue the job, touch [Cancel Punching].
When performed by technical representative
If the punch scrap box has become full while a job is being performed, the job being performed is
paused. To continue the job, touch [Cancel Punching]. However, the continued job is printed without
holes being punched.
bizhub C451/C550/C650
10
10-35