Control Panel; Name Of Parts - Konica Minolta bizhub C558 Quick Manual

2
2.5

Control Panel

The optional Keypad KP-101 is equipped on the right side of the Control Panel.
2.5.1

Name of parts

No. Name
1 Touch Panel
2 Mobile touch area
3 Access
4 Menu
5 Reset
6 Stop
7 Start
2-32
Description
Various screens and messages are displayed. Directly touch the
Touch Panel to configure each setting.
Used to associate this machine with an NFC-compatible Android
terminal.
You can place an Android terminal with PageScope Mobile for An-
droid installed on the mobile touch area to register this machine or
to perform user authentication.
This area is also used to associate this machine with an iOS terminal
that supports Bluetooth LE. The optional Local Interface Kit
EK-609 is required to use the Bluetooth LE function.
Bringing the iOS terminal closer to this machine allows you to reg-
ister this machine or perform user authentication with an operation
from PageScope Mobile for iPhone/iPad.
For details, refer to the User's Guide CD/DVD.
If user authentication or account track is enabled, enter the user
name and password for user authentication or the account name
and password for account track, then press this key to start the use
of this machine. After a target operation is completed, press this key
once again to end the use of this machine.
Press this key to display the main menu.
Press this key to reset all settings, excluding the registered ones,
that you entered using the Control Panel.
Press this key to temporarily stop an active copy, scan, or print job.
Press to start the copy, scan or fax operation.
bizhub C658/C558/C458/C368/C308/C258
Control Panel 2.5