10
2
From the job list, select the job whose proof copy is to be printed, and then touch [Proof Copy] key.
If the job to be removed from the Held Jobs list is not displayed, touch [↑] or [↓] until the desired
–
job is displayed.
–
If an incorrect job was selected, touch the button for the selected job again to deselect it.
–
After the single proof copy is printed, check the print result.
How is printing of a proof copy stopped?
?
% Press the [Stop] key.
!
Detail
To change the settings, touch [Check Job Set.] in the Release Held Job screen. For details, refer to
"Printing a stored job" on page 10-12.
10.2.7
Printing a stored job
A job is removed from the Held Jobs list and printed.
Note
For details on displaying the screen, refer to "Displaying the Current Jobs list (stored jobs and active
jobs)" on page 10-10.
1
In the Current Jobs list of the Print tab, touch [Release Held Job].
The Release Held Job screen appears.
10-12
Managing jobs
C353/C253/C203