Lan Port Leds; Using Leds For Troubleshooting; Figure 25: Lan Port Leds - Hughes HN9400 User Manual

LEDs
LED Appearance
Blinking
Off *
System
Blinking *
Off *
Power
Flashing
Blinking
Off *
Bold type indicates LED appearance during normal operation when the satellite router is transmitting or
receiving data.
*Indicates an operational problem.

LAN port LEDs

Using LEDs for troubleshooting

Receiving data
Condition preventing receipt of data
On Ready to handle user traffic
Virus protection blocking data
Condition preventing full operation
On Power is on and the router is functioning normally
Operating with fallback.bin (backup) version of software
Router is not commissioned or has lost its configuration data
No power
If it appears the LEDs are not functioning properly, make sure you have the correct power supply.
Refer to Checking the power supply
Green and orange LEDs on the each of the two LAN (Ethernet) ports on the router's rear panel
indicate link status and speed, as explained in

Figure 25: LAN port LEDs

For information on using the satellite router's LEDs for troubleshooting, see:
Satellite router status
on page 51 for detailed power supply information.
Figure 25: LAN port LEDs
HN9400 Satellite Router User Guide
1038555-0001 Revision B
Chapter 3
on page 29.
29