Description; Introduction; Certifications - REMEHA Gas 460 S Technical Instructions

1 Introduction

Gas 460 S boilers are made of cast iron:
- with atmospheric gas burners
- with 2 operating stages
- with electronic ignition via the ignition burner for hot water central
heating
- with a useful output of between 119 and 380 kW

2 Certifications

2.1 Introduction
It is CE approved under the following number : 0085BL0187
The boilers are in compliance with the EC directives:
- Royal Decree dated 8th January 2004
- 90/396/EEC Gas Appliance Directive
- 73/23/EEC Low Voltage Directive
Reference Standard : EN 60.335.1
- 89/336/EEC Electromagnetic Compatibility Directive
Reference Standard : EN 50.081.1 ; EN 50.082.1 ; EN 55.014
- 92/42/EEC Efficiency Directive **
Low temperature gas boiler
2.2 User country
User country
Category
Gas type
Distribution pressure (mbar)
The boilers leave the factory operating with H natural gas.
4

Description

,
ES HU
II II
2H3P 2H3P
G20 G31 G20 G31
20 37 25 50
Remeha Gas 460 S
They are designed to be connected to a chimney.
The figure given after Gas 460 S indicates the number of sections
which make up the boiler.
Gas 460 S boilers are delivered with a K control panel. They can be
fitted with an optional RC4 and RC5 control unit (master-slave control
unit options).
- Type B11 (B11 if fitted with the optional combustion products
BS
discharge control system).
France:
Performance class III boiler according to ATG B 84
recommendations.
Belgium:
The boilers comply with the specifications of the HR+ quality label.
The boilers should be fitted with a 160 VA circuit separation
transformer (delivered with the documentation package).
GB
II
2H3P
G20
20
06/02/06 - 300005247-001-B