Life Fitness CLUB SERIES TREADMILL M051-00K60-B098 Operation Manual page 41

T
ROUBLESHOOTING THE
Malfunction
Striding belt slips off-center.
Maximum speed is reduced.
Rubbing sound comes from
underneath machine.
Display does not illuminate when
machine is powered on.
40
T
(
READMILL
CONTINUED
Probable Cause
Floor surface is uneven.
User is pushing striding belt. This oc-
curs when the runner is running faster
than the striding belt will travel, with
the result of the striding belt being
pushed with the runner's feet.
User is stalling striding belt.This will
occur with heavier users at lower strid-
ing belt speeds. The striding belt will
"stall" if the user is traveling slower
than the striding belt speed.
Striding belt/deck malfunctions. The
deck laminate is worn through or the
underside of striding belt is glazed
over (hard, glossy).
Power source is insufficient.
Foreign objects may be stuck under-
neath the machine.
Loose 10 pin connection at display
console or DSP motor control board.
)
Check levelers and level treadmill.
Check striding belt & re-tension as
necessary. Refer to
Instruct users not to push striding belt
in either direction.
Replace belt and deck.
Plug treadmill into a 15 amp. circuit.
Inspect underneath striding belt and
machine. Remove any debris or
objects that may cause interference
with the treadmill.
Check all electrical connections for
proper attachment. Contact Life
Fitness Customer Support Services.
Corrective Action
.