Life Fitness CLUB SERIES TREADMILL M051-00K60-B098 Operation Manual page 26

H R I
TM
EART ATE NTERVAL
This program also combines the standard HILL workout profile with the concept of Heart Rate Zone Training. The default
target heart rate is calculated as 80% of the theoretical maximum (HRmax), but the user can adjust the target rate during
the workout setup. The workout alternates between a hill, which brings the heart rate up to the target rate of 80% of
HRmax, and a valley which brings the heart rate down to 65% of HRmax. After a standard three-minute warm-up, the
workout progresses toward the first hill and heart rate goal. Once the goal is reached, the hill continues for three minutes,
then the level decreases into a valley. Once the 65% of HRmax goal is reached, the valley continues for three minutes,
after which the next hill begins. The user's fitness level determines the number of hills and valleys encountered within the
duration. At the end of the duration, the workout goes into a cool down phase. If the heart rate goes above the theoretical
maximum for more then 45 seconds, the treadmill automatically goes into pause mode. If the user does not reach a heart
rate goal after five minutes, the MESSAGE CENTER displays a prompt to increase or decrease speed, depending on
whether the workout is in a hill or valley phase. The program does not proceed to a new heart rate goal until the user
reaches the current goal.
80% HRmax 80% HRmax 80% HRmax
Valley Valley Valley
Warm-up
65% HRmax 65% HRmax 65% HRmax
HEART RATE INTERVAL Workout Profile
144 BPM 144 BPM 144 BPM
117 BPM 117 BPM 117 BPM 117 BPM
User Example: 80 percent of theoretical maximum (HR max ) (40 year old / 144 recommended BPM)
25