Eneo HDD-2080Z03IR D User Manual page 23

FULL-HD AF ZOOM CAMERA
Operating Instructions
7-2. PRIVACY
: 10 Privacy zones which can be enabled individually by ZON DISP are
available to mask the video.
• ZONE NUM : Set a number to select a privacy zone from 1~10.
• ZONE DISP : ON enables to display relevant privacy zone
• H-POS, V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
7-3. MOTION
(default: OFF)
: MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message.
• SENSITIVITY : Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily. Too low
sensitivity will cause the erratic detection by the tree leaves or the light level
changes.
• H-POS,V-POS, H-SIZE and V-SIZE -
Adjust the size and position of the detection window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when motion
is detected and also enables MOTION OSD to ON.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM>ZOOM TARGET. Adjusting , (Joystick)
for ZOOM TARGET varies the viewing angle to be zoomed when the motion
occurs.Set the video left and right and/or up and down by MIRROR/FLIP.
(See page No.28 "SMART MOTION ZOOM")
MOTION
SENSITIVITY
H-POS
V-POS
H-SIZE
V-SIZE
BLOCK DISP
MOTION OSD
SMART MOTION ZOOM
STAY ZOOMING
RETURN
24
|:::::::|::::::| 10
10
5
40
25
OFF
OFF
OFF
5sec
RET