Eneo HDD-2080Z03IR D User Manual page 20

FULL-HD AF ZOOM CAMERA
Operating Instructions
5. DAY / NIGHT
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the light condition and the camera types.
SMART IR can be set to reduce the saturation by the strong IR illumination in the
night in any menu. Setting SMART IR in any menu is identically applied to other
menu. Zero(0) turns off SMART IR and High setting avoids the saturation strongly
but the corners will be darker accordingly.IR LED Control(AUTO/OFF) is available
with IR LED model only. If IR LED is set to OFF, IR LED will be turned OFF but DAY
or NIGHT is still determined by the built-in light photo sensor.
5-1. EXT
: DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXT.
5-2. AUTO
: Used when DAY or NIGHT is determined by light level through the lens and
DAY from/to NIGHT is switched automatically by the scene brightness.
D↔N THRESHOLD, D↔N DELY and SMART IR can be set in the menu.
When EXPOSURE>AGC is less than 10, DAY/NIGHT AUTO is disabled and
forcibly switches to ___(DAY) to avoid the malfunction. EXT, B/W (NIGHT)
and COLOR(DAY) is independent on AGC level. When EXTERNAL IR LED
is used with NON IR LED model, please set to IR LED MODE ON.
• D↔N THRESHOLD (0~20):
Sets the threshold level switching from/to DAY(color) or NIGHT(B/W).
Setting low level makes camera entered NIGHT at lower light level. High level
makes camera exited NIGHT at brighter light level.
• D↔N GAP (0~15):
Sets the gap level switching from/to DAY(color) or NIGHT(B/W).
DAY/NIGHT AUTO
D<->N THRESHOLD
D<->N GAP
D<->N DELAY
SMART IR
RETURN
21
|:::::::|::::::| 10
|:::::::|::::::| 10
5s
|:::::::|::::::| 10
RET