Eneo HDD-2080Z03IR D User Manual page 17

FULL-HD AF ZOOM CAMERA
Operating Instructions
1-4. LENS REFRESH
: LENS REFRESH can be set to 1~10day and performs the scheduled LENS
Initialization automatically. Every initialization occurs when the time reaches
the scheduled time after setup or power up. When LENS REFRESH initiates
LENS Initialization, a notification 'LENS INITIALIZING...' appears on the top
left corner on the monitor.
1-5. LENS INIT
(default: ON '
: Lens initialization is necessary during the installation or the regular operation
to align the position data with the mechanical positions whose lens elements
may move and deviate from its calibrated position by the shock or vibration, for
example, during the transportation.
LENS INIT starts the lens initialization when pressing the joystick lever straight
down for about 2 sec.
LENS INIT checks the positions for zoom and focus at both of the end positions
and saves them for the references.
Lens initialization is automatically executed at power up.
CAUTION
• It is strongly necessary to execute LENS INIT in cases below;
1) At the final step for the installation.
2) When focus becomes out of control by the shock or vibration.
2. EXPOSURE
2-1. MODE
(default: AUTO)
: Can set EXPOSURE MODE to AUTO, IRIS Priority, SHUT. Priority, MANUAL
and Flickerless. SHUT. Priority, MANUAL and Flickerless modes disable
SENS-UP and MOTION BLUR functions.
HOME POSITION
O-ZOOM RATIO
DURATION
RETURN
(default: OFF)
)
18
OZ X2.0
5sec
RET