Eneo HDD-2080Z03IR D User Manual page 16

FULL-HD AF ZOOM CAMERA
Operating Instructions
EXIT
1. ZOOM/FOCUS
ZOOM / FOCUS
FOCUS MODE
D-ZOOM
HOME POSITION
LENS REFRESH
LENS INIT.
RETURN
1-1. FOCUS MODE
: ZOOM PUSH, AUTO and MANUAL modes are available for focusing.
• ZOOM PUSH: Focusing is activated only when zoom in/out is working.
• AUTO: Focusing is always working.
• MANUAL: Focusing can only be adjusted by ▲,▼ of OSD control joystick
or the remote control via RS-485.
1-2. D-ZOOM
(default: OFF)
: D-ZOOM(Digital zoom) is available up to 32x. D-ZOOM starts working when
the optical zoom reaches its maximum tele-position. Zoom ratio is displayed
on the right bottom corner of the monitor if SPECIAL>DISPLAY>ZOOM RATIO
is set to ON.
1-3. HOME POSITION
: Camera can be configured to return to pre-defined Zoom position automatically
after certain period since ZOOM IN/OUT control is accomplished.
Home Position is recovered even after camera is re-initializing or Power ON/OFF.
• O-ZOOM RATIO: Sets the Optical ZOOM positon as Home Position.
(x1.0~x3.0 / x1.0~x2.4)
• DURATION: When ZOOM IN/OUT control is accomplished, camera returns to
pre-defined Zoom position after Duration time.
If SMART MOTION / PRESET ZOOM are running, duration for Home position
starts after finishing SMART MOTION / PRESET ZOOM.
SAVE & EXIT – Exits the menu after saving the parameters.
EXIT – Exits the menu without saving the menu.
ZOOM PUSH
OFF
OFF
OFF
ON
RET
(default: ZOOM PUSH)
(default: OFF)
17