Wps Setup - Planet WDRT-1200AC User Manual

5.4.2 WPS Setup

WPS (Wi-Fi Protected Setup) is designed to ease setup of security Wi-Fi networks and subsequently network
management. The WPS enables the PC with WPS function to connect to the wireless network of the AP without
setting any parameters, such as SSID, security mode, or password.
STEP 1
Simply enter a PIN code or press the software PBC button or hardware WPS button (if any) and a secure
wireless connection is established.

PIN To use this option, you must know the PIN code from the wireless client and enter it in
corresponding field on your device while using the same PIN code on client side for such
connection.

PBC: If you press the hardware WPS button on the device, it means that PBC encryption method is
successfully enabled. And an authentication will be performed between your router and the
WPS/PBC-enabled wireless client device during this time; if it succeeds, the wireless client
device connects to your device. Repeat steps mentioned above if you want to connect more
wireless client devices to the device.
Choose Wireless Setup > WPS Setup and the following page appears.
WPS (Wi-Fi Protected Setup)
Quick & Easy Wireless Connection
Click
Figure 5-4-3 WPS Setup
User Manual of WDRT-1200AC
STEP 2
Press
-45-
STEP 3
Connected