Step 3. Select PPPoE, if your ISP is using a PPPoE connection and provide you with PPPoE user name and
password info.
Object
Login:
Password:
Service Name:
Connection Mode:
Idle Timeout
MTU:
Primary DNS Address:
Secondary DNS Address:
Figure 5-3-5 WAN Setup
Description
Enter the User Name provided by your ISP.
Enter the password provided by your ISP.
Type the name of this router.
Select "Always On" or "Dial On Demand".
If you select "Dial On Demand", you can configure the time which
is auto disconnecting to ISP.
The maximum transmission unit. You can keep it as default.
Enter the necessary DNS address provided by your ISP.
Enter the other DNS address if your ISP provides you with 2 such
addresses, and it is optional.
-37-
User Manual of WDRT-1200AC