Planet WDRT-1200AC User Manual page 72

The page includes the following fields:
Object
 Service Name:
 Service User:
 Service Type:
 Triggering Starting Port:
 Triggering Ending Port:
 Connection Type:
 Starting Port:
 Ending Port:
Figure 5-6-10
Description
Enable or disable Port Triggering function.
You may select Any or Single Address.
Any: All users in the network are allowed to use the service.
Single Address: Input the NIC IP address of the PC to limit the
service to this NIC.
Choose a protocol used on the triggering port. You may choose
TCP/UDP, TCP or UDP.
Set a port on which connection is initiated.
Set an ending trigger port.
Choose a trigger protocol from TCP&UDP, TCP and UDP.
When an open port is opened after connection is initiated at the
trigger port, connection can be initiated at the open port.
Set an ending triggered port.
-66-
User Manual of WDRT-1200AC