3.
Open a command prompt, and type ping 192.168.1.1, and then press Enter.
If the result displayed is similar to
Router has been established well.
If the result displayed is similar to
Router has failed.
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on newly installed adapters.
Figure
4-7, it means the connection between your PC and the
Figure 4-7 Successful Ping Command
Figure
4-8, it means the connection between your PC and the
Figure 4-8 Failed Ping Command
-21-
User Manual of WDRT-1200AC