Advanced Setup - Planet WDRT-1200AC User Manual

 Enable Wireless
Isolation:
 Enable Broadcom WMF:
 Guest Wireless Network
Name (SSID):
 Security Options:

5.4.4 Advanced Setup

On this page, you can configure the 2.4G and 5G wireless advanced parameters. It is recommended to use the
default parameters.
wireless network with this SSID.
Enable or disable Wireless Isolation function.
When this function is enabled, wireless multicast will be more fluent.
Set a name (SSID) for your wireless network. User can access the
wireless network through it only. However, if you switch to Client
Mode, this field becomes the SSID of the AP you want to connect
with.
Select the security mode from the Security Options dropdown list.
There are 5 options in the Security Mode dropdown list:
 None
 WEP
 WPA-PSK[TKIP]
 WPA2-PSK[AES]
 WPA-PSK[TKIP]+WPA2-PSK[AES]
Figure 5-4-5 Advanced Setup
-47-
User Manual of WDRT-1200AC