Table of Contents
Advertisement
To receive alerts and logs by e-mail:
Step 1. Select the Turn E-mail Notification On check box.
Step 2. In the Outgoing Mail Server box, type the outgoing SMTP mail server of your ISP (for example,
smtp.myISP.com).
If you leave this box blank, no alerts or logs will be sent to you.
Tip: You use this information when you set up your e-mail program. If you can't remember it, check the
settings in your e-mail program.
Step 3. In the Send To This E-mail Address box, type an e-mail address to have alerts and logs sent to you or
someone else.
Use a full e-mail address (for example, Jackie@myISP.com).
Step 4. In the Your E-mail Address box, type an e-mail address you want to use to send the alerts and logs.
Use a full e-mail address (for example, Jackie@myISP.com).
Step 5. If you want an e-mail alert sent whenever someone on your network tries to connect to a blocked URL,
select the Send Alert Immediately check box.
Step 6. If you don't want logs sent, select None from the first list in the Send Logs According To This
Schedule area.
Or
If you want logs sent, select one of the other options.
If you selected Weekly, then select which day of the week.
If you selected Weekly or Daily, select the time of day for the e-mail to be sent.
Step 7. Click Apply to have your changes take effect.
User Manual of WDRT-1200AC
-75-
Advertisement
Table of Contents
