Option Adjustment; Changing Setup Options - Fisher & Paykel DD603 User Manual

OPTION ADJUSTMENT

Changing Setup Options

To enter the option adjustment mode, press POWER to turn the LCD on, then
hold the ECO button and KEYLOCK button simultaneously for 5 seconds,
ensuring that ECO is pushed first. Once the option adjustment mode is
entered, a beep is emitted and the LCD displays the letters rA. Pushing the
START/PAUSE button scrolls through the options and allows changes as
follows:-
Rinse Aid Setup (rA).
Water Supply Hardness Setup (hd).
Auto Power Option (AP).
End of Cycle Beeps (EC).
Closed Drawer Option (Ld).
Clean/Dirty Dish Symbol (dS).
Dry Enhancement Option (LH).
Integrated:- On an integrated DishDrawer where there is no display, the
option chosen is indicated by the lights showing on the integrated badge as
follows:-
Rinse Aid Setup (red light above START/PAUSE button).
Water Supply Hardness (green light above START/PAUSE button).
Auto Power Option (orange light above START/PAUSE button).
End of Cycle Beeps (green light above START/PAUSE and red light above
Keylock) button).
Closed Drawer Option (red light above START/PAUSE and KEYLOCK
buttons).
Clean/Dirty Dish Symbol (not available on Integrated models).
Dry Enhancement Option (orange light above START/PAUSE button, ECO
light is red).
Push POWER at any time to exit this setup mode.
Integrated:- On an integrated DishDrawer when one of the options is
changed, it is indicated by the red wash cycle LEDs on the secondary control
panel. If an option is turned on, then all the LEDs turn on, and if an option is
turned off, all the LEDs turn off.
4