Continuous Cycle - Fisher & Paykel DD603 User Manual

Fast Test Cycle
Press and hold KEYLOCK, then START/PAUSE for 5 seconds.
All LEDs & LCD segments except Keylock are illuminated.
Press POWER twice.
"FC" will show in the display (integrated: Heavy, Normal, Delicate, Rinse
LEDs showing).
Press START/PAUSE twice.
The 5 minute fast test cycle will start.
Press POWER to exit.

Continuous Cycle

Press and hold KEYLOCK, then START/PAUSE for 5 seconds.
All LEDs & LCD segments except Keylock are illuminated.
Press POWER three times.
"CC" will show in the display (integrated: Heavy, Normal, Rinse LEDs
showing).
Press START/PAUSE.
The last cycle that had been selected prior to going into diagnostics mode
will be run continuously.
Press POWER to exit.
Temperature & Voltage Display Mode
(Not available on integrated models)
Start a wash cycle running.
Press & hold KEYLOCK for 4 seconds.
Keylock will be activated.
Press & hold START/PAUSE for 8 seconds.
LCD will now alternate between °C symbol & the water temperature.
Press START/PAUSE.
LCD will now alternate between °E symbol & the controllers rail voltage.
Press & hold KEYLOCK for 4 seconds.
Keylock is deactivated.
Press POWER to exit.
16