Fisher & Paykel DishDrawer DD603 Installation Instructions Manual

I N S T A L L A T I O N I N S T R U C T I O N S
FOR PREFINISHED & INTEGRATED (SINGLE & DOUBLE) MODELS
(NOTE: FOR INTEGRATED PANEL PREPARATION INSTRUCTIONS REFER TO SUPPLIED SHEET P/N 526608)
DOUBLE MODELS
MODELS DD603 Prefinished DD603I Integrated
NOTE TO THE INSTALLER
1. Read these instructions completely and carefully.
2. Installation of this
mechanical and electrical skills.
3. Be sure to leave these Instructions with the Customer.
4. At the completion of the
Installer must perform Final Check List as per Section 11
of these Installation Instructions.
5. Remove all packaging materials supplied with the
.
R
NOTE TO THE CUSTOMER
Keep these Installation Instructions with your User Guide for
future reference.
before it is operated.
requires basic
R
installation, the
R
must be securely anchored
R
R
SINGLE MODELS
MODELS DS603 Prefinished DS603I Integrated
These instructions must be followed precisely to ensure correct
venting and operation of the
related to the incorrect installation, the installer will be liable for any
repairs.
Before installing the
the circuit breaker. Ensure all water connections are turned OFF. It is
the responsibility of the plumber and electrician to ensure that each
installation complies with all Codes and Regulations.
The R MUST be installed to allow for future removal from
the enclosure if service is required.
Improper installation is not covered under the Warranty.
If the R is to be relocated from one installation to another
it must be kept upright to avoid damage from water spillage.
part number 526607 I
March 2003
(page 1 of 12)
R . In the event of a fault
R , remove the house fuse or open
USA