Option Adjustment Mode; How To Change The Setup Options (Classic, Designer & Integrated Models) - Fisher & Paykel DishDrawer DD247 Service Manual

4

OPTION ADJUSTMENT MODE

25
4.1 How to Change the Setup Options (Classic, Designer & Integrated models)
(Not Wireless Model)
4.1.1 Rinse Aid, Water Supply Hardness, Auto Power , End of Cycle Beeps, Closed Drawer Option, Clean/
Dirty Dish Symbol.
To enter this setup mode, press POWER, then hold the ECO touch switch and KEYLOCK button simultaneously
for 5 seconds, ensuring that ECO is pushed first. Once the setup mode is entered a beep is emitted and the LCD
displays the letters rA on classic models only. Pushing the START/PAUSE button allows the user to scroll through
and change the following options:-
• Rinse Aid Setup (rA)
• Water Supply Hardness Setup (hd) – only available on water softener models
• Auto Power Option (AP)
• End of Cycle Beeps (EC)
• Closed Drawer Option (Ld).
• Clean/Dirty Dish Symbol (dS)
Note: there is no dry enhancement mode.
On a Designer or Integrated DishDrawer™, where there is no display, the user can still tell which option they
have chosen by using the lights showing on the integrated badge or secondary display panel as follows:-
Integrated
Option
Rinse Aid Red Light above
Setup Start /Pause
Water Supply Green light above
Hardness start pause
Auto Power Orange lightabove
Option start pause + Red
above ECO
End of Cycle Green light above
Beeps start pause + Red
above ECO
Closed Drawer Red light above start
Option pause + Red above
ECO
Push POWER at any time to exit this setup mode.
4.1.2 Rinse Aid Setup (rA)
The current rinse aid setting is shown using the red LEDs on the touch switch panel.
The amount of rinse aid dispensed into a rinse cycle can be varied to suit the level of hardness of the local water
supply. It can be set to 1 - 5 dispensing levels.
(1 = approx 0.5mls (1/10 teaspoon) of rinse aid, 5 = approx. 2.5mls (½ teaspoon) of rinse aid.
Push KEYLOCK to advance the rinse aid setting. Once the desired setting is achieved, push POWER to exit. The
rinse aid index is stored in EE memory, so even with the power removed the rinse aid level is retained.
Light Colour
1-5 LED's will show set
level
1-5 LED's
O LED's is option off
All LED's is option on
No LED's is option off
All LED's is option on
No LED's is option off
All LED's is option on
No LED's is option off
Secondary Panel
Blue light above
start pause
Red light above
start pause
Purple light above
start pause + Red
above ECO
Blue light above
start pause + Red
above ECO
Red light above
start pause + Red
above ECO
Designer
Light Colour Secondary Panel
1-5 LED's will show set
level
1-5 LED's
O LED's is option off
All LED's is option on
No LED's is option off
All LED's is option on
No LED's is option off
All LED's is option on
No LED's is option off