Advanced Features; Paging; Dnd Synchronization - Polycom SoundPoint MAXCS 7.5 User Manual

Advanced Features

The IP-550, IP-650, and IP-670 models support extra functionality, if the phone has been assigned a MAXCS Polycom
Advanced Features license:
• Polycom paging
•

DND Synchronization

•
BLF / Line Monitoring
•
Line Park

Paging

If your Administrator included you in a Polycom paging group, you can page other users in that group.
Note that Polycom paging works only between Polycom phones that are on the same network.
• Group 1 is the default, and appears at the top of the paging group
list.
• Group 24 (Priority group) will override any active calls.
•
Group 25 is the Emergency paging group.
•
Other paging groups that your Administrator has set up are
numbered 2-23.
To send a page,
1 Press Paging. (If you do not see this key, then your Administrator has
not configured paging for your extension.)
2 Select the group that you want to page.
3 Press Page.
4 Wait a few seconds, and then begin speaking.
5 When you finish speaking, press the End Page button.
If you receive a page, your phone will play a brief tone, and then you will hear the page.
DND Synchronization
When you toggle Do Not Disturb mode on and off via the phone display or via MaxAgent or another client, all devices and
clients will synchronize the DND status.
To turn on DND,
1 Press the Do Not Disturb button.
2 To cancel your DND state and accept calls again, tap the button again.
MAXCS 7.5 Polycom SoundPoint User Guide Page 5