2N Helios IP Uni Installation Manual page 22

IP Address Retrieval
Take the following steps to retrieve the
Connect (or, if connected, disconnect and reconnect)
power supply.
Wait for the second sound signal
Press the quick dial button 5 times.
2N
If the address is 0.0.0.0, it means that the intercom has not obtained the IP
address from the DHCP server.
Note
Static/Dynamic Address Setting Mode Switching
In case your
switch the modes using one button only.
Connect
if already connected).
Wait for the first acoustic signal
Press
The acoustic signal
Wait until the device is restarted automatically.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP Uni will read its IP address.
Be sure to press the button sequence within thirty seconds after the
sound signal for security reasons. Up to 2 s intervals are allowed between
the presses.
®
2N Helios IP Uni
®
2N Helios IP Uni
the quick dial button 15 times.
®
2N Helios IP Uni
.
device is equipped with 1 or 2 buttons, you can
to the power supply (or, disconnect and reconnect it
.
indicates mode switching.
IP address:
®
2N Helios IP Uni to the
22