Focus, Zoom, And Position; Closing The Camera - Wirepath WPS-750-BUL-IPH Installation Manual

7.6. Focus, Zoom, and Position

A. The lens of the camera has manual focus and zooms knobs for setting the correct
field-of-view.
B. Connect the test adapter from the camera to a monitor as shown below for viewing
adjustments.
C. Use the included 3mm Allen key to adjust focus and zoom.
D. Disconnect the WPS-CCTV-TESTER or monitor and power supply from the local
test connections and disconnect the BNC Test Adapter once the ideal scene is set.

7.7. Closing the Camera

Recommendation: Before replacing the cap we recommend that a new silica gel pack
be inserted into the camera to ensure that any moisture present will be removed.
A. Install a microSD card in the slot if desired.
B. Remove the spare silica packet from its sealed foil package (taking care not to rip
the inner packet) and place it inside the test adapter opening.
C. Close the cap, and make sure the cap is sealed securely.
© 2014 Wirepath Surveillance
WPS-750-BUL-IPH Installation Manual
Focus
(Front)
Zoom
(Rear)
Test Adapter
Connector
13