1. Manuals
  2. Brands
  3. Wirepath Manuals
  4. Security Camera
  5. WPS-500-DOM-A-WH
  6. Installation manual

Wirepath WPS-500-DOM-A-WH Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WPS-500-DOM-A-WH
WPS-500-DOM-A-BL
DOME
CAMERA
INSTALLATION MANUAL
Review manual thoroughly before installation.
Retain for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WPS-500-DOM-A-WH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wirepath WPS-500-DOM-A-WH

Summary of Contents for Wirepath WPS-500-DOM-A-WH

  • Page 1 WPS-500-DOM-A-WH WPS-500-DOM-A-BL DOME CAMERA INSTALLATION MANUAL Review manual thoroughly before installation. Retain for future reference.

  • Page 3: Table Of Contents

    3.4 Backlight...............14 3.5 Day & Night............15 3.6 DPC............... 16 3.7 Special..............16 3.8 Comm Adj............20 3.9 Reset..............21 3.10 Exit............... 21 RS485 System Diagram............... 22 Troubleshooting................. 23 Specifications.................. 2 5 Dimensions................... 26 Warranty....................27 © 2012 Wirepath Surveillance...

  • Page 4: Safety Instructions

    WPS-500-DOM-A Installation Manual SAFETY INSTRUCTIONS This information is provided to ensure your safety and to prevent physical or financial loss. Please read this document carefully before installing and operating the camera. 1. Handle with care. Use caution when handling to avoid damage to sensitive internal components. 2. Do not install camera under extreme temperatures. This camera only operates under temperature conditions between 14˚F ~ 140˚F.

  • Page 5: Features

    DVR or PTZ controller connected to the camera’s RS485 wire leads. • 3-Axis Gimbal A 3-axis gimbal provides a wide range of camera positioning angles through mechanical adjustment. • Weatherproof Housing The IP66-rated weatherproof housing makes this camera ideal for outdoor surveillance. © 2012 Wirepath Surveillance...

  • Page 6: Package Contents

    WPS-500-DOM-A Installation Manual PACKAGE CONTENTS (1) Camera (1) AC/DC plug (3) Screws (3) Wall fasteners (1) 3mm Allen Key (1) Foam gasket Manual NOTE 1: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A is recommended. NOTE 2 : A Silica Gel package is mounted inside the dome housing. This package should remain inside the housing after installation.
  • Page 7 Ensure the rubber lens gasket is in place. 7. Replace the dome cover to the dome base, and make sure the screws on the dome cover are tightened securely. Doing so seals the dome from the elements, and creates a tight fit around the rubber lens gasket to prevent the IR LEDs from reflecting into the lens. © 2012 Wirepath Surveillance...

  • Page 8: Set-Up

    WPS-500-DOM-A Installation Manual SET-UP Operating the OSD Menu • To view the OSD, the camera must be connected to a display monitor. OSD Menu Button • The button found on the rear circuit board of the camera provides five separate actions: UP, DOWN, EXIT, ENTER and MENU. • Press the button to enter into the OSD MENU page. • Press UP, DOWN, EXIT (Left) or ENTER (Right) to select items on the menu and begin configuration.
  • Page 9 All Day, Night Only RETURN DAY/NIGHT COLOR AUTO DN LEVEL 1 SEC DN DELAY ND LEVEL 5 SEC ND DELAY RETURN ON, OFF BURST IR SMART ON, OFF IR LEVEL LOW, HIGH RETURN See Page 16 for instructions © 2012 Wirepath Surveillance...
  • Page 10 WPS-500-DOM-A Installation Manual OSD Menu Structure cont. (bold indicates factory preset) ON, OFF SPECIAL CAM TITLE MOTION AREA 1, 2, 3, 4 ON, OFF AREA SEL ON, OFF AREA STATE 0-15 (4) HEIGHT 0-15 (4) WIDTH 0-15 (2) LEFT/RIGHT 0-15 (2) TOP/BOTTOM 0-255 (38) DEGREE...
  • Page 11 NEG IMAGE ON, OFF CAM ID 1~255 (1) COMM ADJ. ON, OFF ID DISPLAY 2400, 4800, 9600, BAUD RATE 19200, 38400, 57600 PELCO-D, PELCO-P PROTOCOL ID POS RETURN ENGLISH LANGUAGE VERSION RETURN FACTORY RESET RESET RETURN EXIT © 2012 Wirepath Surveillance...

  • Page 12: Osd Menu Settings

    WPS-500-DOM-A Installation Manual OSD MENU SETTINGS The camera menu allows for SETUP the adjustment of settings to LENS MANUAL obtain optimal image clarity EXPOSURE and color realism. WHITE BAL. ATW1 BACKLIGHT DAY&NIGHT AUTO Note : If there is a “ ”...

  • Page 13: White Balance

    • ATW2: Auto Tracking White Balance, color temperature is set to 2500° K. • AWCSET: Set the white balance to the scene. • MANUAL: Manually set the white based by adjusting Red and Blue color settings. © 2012 Wirepath Surveillance...

  • Page 14: Backlight

    WPS-500-DOM-A Installation Manual AWCSET Setting This function is ideal for an environment SETUP with the predominance of a single color. LENS MANUAL EXPOSURE For example, when used in a casino and WHITE BAL. AWCSET the camera is pointed to a green table, BACKLIGHT DAY&NIGHT AUTO...

  • Page 15: Day & Night

    AUTO, the camera uses the lens to detect the Lux rating of the picture and switches to  N LEVEL --------|--------091  N DELAY 1 SEC color or B/W automatically.  D LEVEL ---|-------------046  D DELAY 5 SEC RETURN © 2012 Wirepath Surveillance...

  • Page 16: Dpc

    WPS-500-DOM-A Installation Manual • D  N LEVEL: Set the level that the camera switches from color mode to B/W mode. The larger the value, the quicker the camera will switch to B/W mode. • D  N DELAY: Set the delay time before the camera switches from color mode to B/W mode.
  • Page 17 • Customize the size and the position of each detection zone by adjusting HEIGHT, WIDTH, LEFT/RIGHT, TOP/BOTTOM values. • DEGREE: Increase motion detection sensitivity by increasing this setting. • VIEW: When set to ON, the screen will highlight motion of the moving object with magenta rectangles. © 2012 Wirepath Surveillance...
  • Page 18 WPS-500-DOM-A Installation Manual PRIVACY Setting PRIVACY Privacy Mask configuration allows the AREA SEL. AREA 1 masking of up to 8 “surveillance-free” AREA STATE HEIGHT -----|--------------32 zones of the picture. For example, this WIDTH -------------|----- 32 may be used for a camera that has a LEFT/RIGHT ---|----------------20 TOP/BOTTOM --------|---------- 16 neighbor’s window in part of the scene.
  • Page 19 - PED LEVEL: The higher the value, the brighter the image. - COLOR GAIN: The higher the value, the darker the image. - GAMMA: Standard GAMMIA value is 0.55. Adjust the value between 0.05 ~1.00. © 2012 Wirepath Surveillance...

  • Page 20: Comm Adj

    WPS-500-DOM-A Installation Manual • NEG. IMAGE: The Negative Image View offers a wider dynamic range and preserves most detail as it displays data exactly as the CCD sees it. Select ON for the Negative Image View mode to reproduce images with the most light intensity and color information.

  • Page 21: Reset

    FACTORY RESET and pressing the MENU button. This option does not have an "UNDO" feature, so ensure default settings are desired before selecting this function. EXIT Select EXIT to exit the OSD menu. © 2012 Wirepath Surveillance...

  • Page 22: Rs485 System Diagram

    WPS-500-DOM-A Installation Manual SYSTEM DIAGRAM RS485 Cable ID 1 Controller ID 2 ID 3 ID 4 ID 255 ID 0...

  • Page 23: Troubleshooting

    – 75 Ohm. • Reset the camera to factory default settings. Image appears blurry on the display • Check the focus of the lens. • Check the lens. If necessary, clean with a soft, clean cloth. • Check the camera iris and shutter settings. • Reset the camera to factory default settings. The camera is not working properly and the camera housing is hot • Check if camera is connected to the correct power source. © 2012 Wirepath Surveillance...
  • Page 24 WPS-500-DOM-A Installation Manual The color of the picture is not correct • Check White Balance and Color (Red / Blue) settings. • Reset the camera to factory default settings Screen flickers continuously • Check the camera location to make sure it is not pointing directly towards the sun or bright light source • Check if the flickerless control is set correctly; proper settings should reflect required refresh rates. • Reset the camera to factory default settings AGC settings are not available • DAY&NIGHT Mode is set to AUTO. To enable AGC control change DAY&NIGHT to EXT, Color or B/W RS-485 communication failure • Check whether the RS-485 polarity is connected correctly to the RS-485 port.

  • Page 25: Specifications

    Power Power Consumption 7W, 560mA Size 3.7 ~ 12mm Varifocal Auto Iris Lens Lens Field of View- Horizontal 76.9 ˚ (W) ~ 22.7 ˚ (T) Field of View- Vertical 56.89 ˚ (W) ~ 17.07 ˚ (T) Weatherproof IP 66 Grade Certifications CE, FCC, ROHS Net Weight 2.09 lb Dimensions 3.86” (H) * 5.87” (W) Operating Temperature 14˚F ~ 140˚F / 80% RH *Specifications are subject to change without notice © 2012 Wirepath Surveillance...

  • Page 26: Dimensions

    WPS-500-DOM-A Installation Manual DIMENSIONS DIMENSIONS 5.87” 50˚ 3.86” 50˚ Side View Maximum Lens Angle Top View Bottom View...

  • Page 27: Warranty

    This warranty shall not apply to products which have been abused, modified, disassembled or improperly installed. Products to be repaired under this warranty must be returned to Wirepath™ Surveillance or a designated service center with prior notification and an assigned return authorization number (RA). © 2012 Wirepath Surveillance...
  • Page 28 120111 © 2012 Wirepath Surveillance...

This manual is also suitable for:

Wps-500-dom-a-bl

Table of Contents