Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wirepath WPS-350-DOM-A-WH
Summary of Contents for Wirepath WPS-350-DOM-A-WH
- Page 1 WPS-350-DOM-A-WH WPS-350-DOM-A-BL DOME CAMERA...
-
Page 3: Package Contents
NOTE 1: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A or WPS-PS multiple output power supplies are recommended. NOTE 2: A Silica Gel package is mounted inside the dome housing. This package should remain inside the housing after installation. © 2013 Wirepath Surveillance... -
Page 4: Optional Accessories
WPS-350-DOM-A Installation Manual OPTIONAL ACCESSORIES Wirepath Surveillance offers a wide range of accessories that provide power to the cameras, allow for various mounting options, and make connection to the head end quick and easy. MOUNTS WPS-MNT-EXT-DOM Dome Camera Extension Mount •... -
Page 5: Wiring Accessories
WPS-350-DOM-A Installation Manual WIRING ACCESSORIES In addition to mounts and power supplies, Wirepath offers a full line of accessories to easily send power, audio, and video over 2 conductors of Cat5 wiring back to the head end. Visit www.SnapAV.com for a complete listing of accessories. - Page 6 WPS-350-DOM-A Installation Manual FEATURES • 1/3” Sony Super HAD II CCD The Sony Super Had II CCD is ideal for low lux illumination resulting in a clear and crisp image. • Varifocal Auto-Iris Lens This camera features a varifocal lens with a focal length of 4-9mm to offer flexibility during installation. The auto-iris function intuitively manages the amount of light passing through the lens for consistent image brightness in varying lighting conditions.
-
Page 7: Installation
Important Note! Be sure that the polarity and the voltage of the power supply connection is correct before attempting to power the camera. Backward polarity or any more than a 12 volt DC power supply will damage the camera. The power supply used must be rated to 1 amp per output minimum. © 2013 Wirepath Surveillance... -
Page 8: Mount The Camera
A.5 - Secure the Camera with the provided screws Mounting to a Single gang Junction Box If using one of the optional Wirepath Mounts (see Optional Accessories). Follow the instructions in the manual that is supplied with the mount and then proceed to step 4. -
Page 9: Troubleshooting
C heck the color of the beads in the Silica pack under the lens cover. • I f the blue crystals have turned pink indicating that the pack has absorbed moisture, replace the pack with the spare provided with the camera. Camera Power Cycles Intermittently • C heck voltage at camera for proper voltage level. • Connect camera locally with a different power supply to test. © 2013 Wirepath Surveillance... -
Page 10: Specifications
WPS-350-DOM-A Installation Manual SPECIFICATIONS Image Sensor 1/3" Color Sony Super HAD II Number of Pixels NTSC:768(H)x494(V) Lens 4~9mm Auto Iris Vari-Focal Lens, Horizontal FOV 60˚(W)~30˚(T) Shutter Control 60~1/100,000 sec Video Test Port Auto IRIS Auto Electronic Shutter Auto Gain Control Back Light Compensation Auto White Balance Sync. -
Page 11: Warranty
This warranty shall not apply to products which have been abused, modified, disassembled or improperly installed. Products to be repaired under this warranty must be returned to Wirepath™ Surveillance or a designated service center with prior notification and an assigned return authorization number (RA). - Page 12 130220-1400 © 2013 Wirepath Surveillance...
Need help?
Do you have a question about the WPS-350-DOM-A-WH and is the answer not in the manual?
Questions and answers