Table of Contents
Advertisement
CHAPTER 4 OPERATOR PANEL SPECIFICATION
4.1 General
4.2 Initial Mode
4.3 On-Line Mode
4.4 Off-Line Mode
4.5 Messages
4.1 General
4.1.1
Introduction
4.1.2
Operator Panel Over View
This documentation describes about M3096NT Network Scanner
Operator Panel specification. This Operator Panel specification
consists of 3 modes(Initial mode/On Line mode/Off Line mode).
Initial Mode mainly displays the message of scanner start up status. If
any error message is displayed in this mode, it is hardware error.
On-Line mode indicates the network scanner is operating on network
environment by logging on to File Server. These modes are selected in
Off-Line mode.
Off-Line mode indicates the network scanner does not require File
Server in its operation except for firmware downloading.
Below shows the Operator Panel Outer View. It is consists of 24
column by 2 row LCD display and 12 buttons, 3 LEDs(not figured).
Each button has assigned functions as printed on the button. The 10 of
12 buttons are also assigned second function to input numbers as
printed above the buttons.
1
Mode 1
ADF
6
Mode 2
Compression
2
3
4
Size
Density
7
8
9
Landscape
Halftone
5
Stop
Resolution
0
Start
Document
4 – 1
Advertisement
Table of Contents
