5.2 Reading a Document in Flatbed Mode
5.2.1 Reading a standard-size document
5 – 2
This section explains how to read a document placed on the document
bed.
If the size of the document is smaller than the document bed, read the
document using the following procedure:
1
Open the document cover.
2
Place the document face down on the document board. Correct
any curled or folded parts of the document.
3
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
4
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
5
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
6
Start the read operation. Do not press on or open the document
cover during the read operation.
7
After reading, open the document cover to remove the document.