Table of Contents
Advertisement
APPENDIX C
C.1 Option
Name
Specfication
IPC-3
CA01952-0191
CA2919-0501
Contact your Fujitsu sales agent for more information
C.2 IPC-3 option board installation
WARING: Follow the outlined procedure to avoid danger from electrical components.
(1)
Verify that the scanner power is turned off.
(2)
Remove the AC cable from the year of the scanner.
(3)
Remove the two screws securing the power supply and the interface PCA assembly. Pul
out the assembly slighly using the tab in the direction shown by the arrow.
CAUTION: Do not pull on the flat cable too strongly or it may be damaged.
Scanner
M3096NT
screws
Tab
feature
Image processing
• Automatic separation
• Image emphasis
• Outline extraction
• Mirror image
• Dynamic threshold
• Noise removing
• Smoothing
flat cable
(inside)
C – 1
Advertisement
Table of Contents
