Reading A Document Larger Than The Document Board; Figure 5.2 Removing The Document Cover - Fujitsu M3096NT Operator's Manual

5.2.3 Reading a document larger than the document board

5 – 4
If the size of the document is larger than the document board, read the
document using the following procedure:
1
Open the document cover at an angle of about 80°, then slide the
cover to the direction of the arrow to remove it.
2 Place the document face down on the document bed.
3
Place the document cover over the document.
4
Read the document.
5
After the read operation, remove the document, replace the
document cover. Mount the document cover to the original
position, and close the document cover.

Figure 5.2 Removing the document cover

NOTICE: Do not remove the document cover for any other purpose.
Document cover
80°
Document bed