Chapter 3 Installation And Connections; Precautions; Client Side Setup - Fujitsu M3096NT Operator's Manual

CHAPTER 3 INSTALLATION AND CONNECTIONS

3.1 Precautions

3.2 Removing the Carrier Fixing Bracket
3.3 Connections
3.4 Mounting the Stacker
3.5 Server Side Setup
3.6 Scanner Side Setup

3.7 Client Side Setup

3.8 Scan
This chapter explains how to install and connect the image scanner.
3.1 Precautions
Place the scanner away from electrical noise
sources and strong magnetic fields. If the
image scanner is used near an air conditioner,
copying machine, or TV set, the scanner may
operate incorrectly.
Keep the scanner out of the sun and away
from heaters. These environments may
shorten scanner life or cause hardware
failures.
Do not install the scanner in a place where
vibrations may occur. This environment may
cause hardware failures or may cause the
scanner to operate incorrectly.
CAUTION
Place the image scanner on a level surface.
Place the image scanner so that the rubber
pads are secured on a flat and solid desktop.
Do not install the image scanner in the following places and environ-
ments. See the appendix A.1 "Installation Specifications" for the
information such as size of installation space.
Do not install the scanner in a humid, dusty,
or damp places. These enviroments may
shorten scaner life or cause hardware fail-
ures. Do not place the image scanner where
liquid spills may occur. Place it on a flat and
even surface.
Be aware of static electricity. If static
electricity is generated, the scanner may
operate incorrectly. Be sure that the flooring
and the desk are made of materials that do
not generate static electricity.
3 – 1